Reaction Type Precision Releasing Agent
＊The sticking force of molding resin is reduced on the surface that is coated with FLUOROSURF and It is powerful way to release even in the molding of complex and detailed shapes that can not be released by ordinary releasing agents.
＊It reacts with the molding material and strongly sticks to it so that continuous mold release is possible.
＊It forms thin film of nanometer level. Mold release of accurate shape is possible in the microscopic molding of more precise than microns order.
＊The releasing agent component is not transferred and thus cleaning of the molded part is not necessary.
＊When performance degrades the re-coating can be done by a simple over-recoating. It is no necessary to remove old film.
＊The releasing agent uses nonflammable solvent. There is no legal restrictions and it can be used safely.
| FG-5084 | FG-5093 | |
| Recommended Object | Glass Mold | Metal Mold |
| Contact Angle (Oil)＊ | 68-70° | 68-70° |
| Slip Drop Angle (Oil)＊ | 7-9° | 7-9° |
| Thickness of film | 10-20nm | 10-20nm |
| Solvent | Nonflammable | Nonflammable |
＊＊measure with 5 μl of n-Hexadecane
Fiuorine Based Releasing Agent Material
There are several grades of
fluorine based releasing agent
material that can be used in
FLUOROSURF such as organic
solvent type, nonflammable
solvent type, aqueous type, etc.
Please contact us . E-mail [email protected]
Various specifications of each
series are available to answer
any requirements of customers.
Please inquire of our customer
service section about details of
each product.
Customer Service E-mail:[email protected]
Our products are chemical
products for industrial use.
They may have an influence on
the health depending on handling
manner.
For this reason, our products or
their samples are not offered
for personal use.
We would like you to accept such
our intention.
